Differences

This shows you the differences between two versions of the page.

--- project:jagtalk [2010/11/13 17:03] – nishimotz
+++ project:jagtalk [2010/12/24 14:45] – nishimotz
@@ Line 1: / Line 1: @@
 ====== jagtalk ======
+Japanese: http://ja.nishimotz.com/project:jagtalk
 jagtalk is modified version of [[:galateatalk]].
@@ Line 10: / Line 12: @@
 $ ./configure --enable-utf8
 $ make
-$ ./gtalk -C jagtalk.conf
+$ sh test-jagtalk.sh
 </code>
-===== Mac support =====
+or you can run:
--11-13
-currently, audio device is disabled.
 <code>
-$ autoconf
+$ ./jagtalk -C jagtalk.conf
-$ sh configure --build=i386-apple-freebsd --enable-utf8 --enable-macosx
 </code>
-Makefile should be modified as follows:
+and type "set Text = 123" (enter) "set Speak = NOW" (enter).
-<code>
+You will hear "hyaku niju san".
-CFLAGS  = -DPACKAGE_NAME=\"jagtalk\" -DPACKAGE_TARNAME=\"jagtalk\" -DPACKAGE_VERSION=\"1.5.1\" -DPACKAGE_STRING=\"jagta\
-lk\ 1.5.1\" -DPACKAGE_BUGREPORT=\"nishimotz@gmail.com\" -DPACKAGE_URL=\"\" -DUTF8=1 -DHAVE_LIBICONV=1 -DMACOSX=1 -DAUTO\
+  * log files and gtalk-eucjp.dic are still EUC-JP, currently.
-_DA=1 -DWORDS_LITTLEENDIAN=1 -arch i386 -g
-</code>
+===== PortAudio support =====
+since 2010-12-24
+unfinished.
+  * USE_PORTAUDIO macro is defined.
+  * do_output.c switches using the macro.
+  * do_output_portaudio.c is not implemented.
+notes:
+  * [[http://ja.nishimotz.com/portaudio]] in Japanese
 <code>
+$ autoconf
+$ make clean
+$ sh configure --enable-utf8 --enable-portaudio --enable-da=no
 $ make
 </code>
-https://github.com/nishimotz/jagtalk/blob/master/jagtalk-macosx.conf
+===== Mac (Snow Leopard) support =====
-https://github.com/nishimotz/jagtalk/blob/master/chasenrc-euc-jp-macosx
+using unidic-chasen1312_utf8-x64. see [[:galateatalk]]
+-11-14
+https://github.com/nishimotz/jagtalk/commit/2df30037817eaf4aa4ddc3338a5e1a217f9e0998
+currently, audio device is disabled.
+<del>
+$ autoconf
+$ sh configure --build=i386-apple-freebsd --enable-utf8 --enable-macosx
+</del>
 <code>
-$ ./jagtalk -C jagtalk-macosx.conf
+$ make -f Makefile.MACOSX
-rep Run = LIVE
-set Text = 123
-rep Speak.stat = PROCESSING
-Bus error
 </code>
-in the debug log below, "set Text = 111" is the input from console.
+<code>
+$ cat run-chasen-macosx.sh
+#!/bin/sh
+/opt/local/bin/nkf -wu | /opt/local/bin/chasen -r chasenrc-utf8-macosx -i w | /opt/local/bin/nkf -eu | /usr/local/bin/chaone -s gtalk --encoding EUC-JP | /usr/bin/tee _chasen.log
+$ head chasenrc-utf8-macosx
+;;
+;;  chasenrc for unidic / chaOne
+;;
+(GRAMMAR /Users/nishimotz/code/unidic-chasen1312_utf8-x64)
+(DADIC chadic)
+omitted.
+$ cat 00-testcmd
+set Text = 1
+set SaveWAV = _out.wav
+set Run = EXIT
+</code>
 <code>
-$ gdb jagtalk
+$ echo "123" | ./run-chasen-macosx.sh
-GNU gdb 6.3.50-20050815 (Apple version gdb-1461) (Wed Dec 23 06:11:18 UTC 2009)
+<S>
-Copyright 2004 Free Software Foundation, Inc.
+  <AP orth="123" pron="イッニサン" aType="3" silence="NON">
-GDB is free software, covered by the GNU General Public License, and you are
+    <W2 orth="123" pos="名詞-普通名詞-一般" pron="イッニサン" aType="3" aConType="C3">
-welcome to change it and/or distribute copies of it under certain conditions.
+      <W1 orth="1" kana="イッ" pron="イッ" pos="名詞-数詞" lForm="イチ" lemma="一" orthBase="1" pronBase="イッ" kanaBase="イッ" formBase="イチ" goshu="漢" iConType="N1" fType="チ促" fForm="促音形" aConType="C3" aType="2"/>
-Type "show copying" to see the conditions.
+      <W1 orth="2" kana="ニ" pron="ニ" pos="名詞-数詞" lForm="ニ" lemma="二" orthBase="2" pronBase="ニ" kanaBase="ニ" formBase="ニ" goshu="漢" fType="イ長添" fForm="基本形" aConType="C3" aType="1"/>
-There is absolutely no warranty for GDB.  Type "show warranty" for details.
+      <W1 orth="3" kana="サン" pron="サン" pos="名詞-数詞" lForm="サン" lemma="三" orthBase="3" pronBase="サン" kanaBase="サン" formBase="サン" goshu="漢" iConType="N3" aConType="C3" aType="0"/>
-This GDB was configured as "x86_64-apple-darwin"...Reading symbols for shared libraries ... done
+    </W2>
+  </AP>
+</S>
+</code>
-(gdb) run -C jagtalk-macosx.conf
+<code>
-Starting program: /Users/nishimotz/code/github/jagtalk/jagtalk -C jagtalk-macosx.conf
+$ sh test-jagtalk-macosx.sh
-Reading symbols for shared libraries ++. done
+* chasen start.
+# of phonemes: 42
 rep Run = LIVE
-set Text = 111
+(omitted)
-rep Speak.stat = PROCESSING
-Program received signal EXC_BAD_ACCESS, Could not access memory.
+$ ls _out.*
-Reason: KERN_PROTECTION_FAILURE at address: 0x00000010
+_out.wav        _out.wav.info
-x0000a35f in make_breath () at make_breath.c:103
-			hinshi = aphrase->mptail->hinshiID;
-(gdb)
-(gdb) bt
-#0  0x0000a35f in make_breath () at make_breath.c:103
-#1  0x000143e2 in text_analysis (text=0x2340b "111") at text.c:190
-#2  0x00007694 in setText (rel=0x23409 "=", val=0x2340b "111") at main.c:596
-#3  0x000085fe in main (argc=0, argv=0xbffff9f8) at main.c:994
 </code>