This is an old revision of the document!


Galatea Dialog Studio

Testing environment

  • Ubuntu 10.04 32bit Desktop (Non-Japanised) Install CD was used. Setup procedure was clean-install (not upgraded from previous version). Hardware is Panasonic CF-R4 (Pentium M 1.20GHz RAM:1GB).

EUC-JP locale generation

galatea-dialog (20100529 or earlier) requires EUC-JP locale within the Ubuntu system.

$ sudo chmod 666 /var/lib/locales/supported.d/local
$ sudo echo "ja_JP.EUC-JP EUC-JP" >> /var/lib/locales/supported.d/local
$ sudo locale-gen

Installation

libreadline5 is not necessary since galatea-dialog 20100530 (see below of this page), hopefully.

$ sudo aptitude install ruby
$ sudo aptitude install freeglut3
$ sudo aptitude install openjdk-6-jre
$ sudo aptitude install chasen
$ sudo aptitude install rhino
$ sudo aptitude install libreadline5 
$ sudo aptitude install ttf-sazanami-gothic

$ sudo dpkg -i galatea-ja-chaone_1.3.2-1_i386.deb
$ sudo dpkg -i galatea-ja-unidic_20090604-1_i386.deb
$ sudo dpkg -i galatea-engine_20090604-1_i386.deb
$ sudo dpkg -i galatea-dialog_20100530-1_i386.deb

Testing SSM

SSM is also known as galateatalk.

$ galatea-runner

It generates ~/.galatea/ssm.conf file.

$ cd /usr/local/galatea-engine/SSM/gtalk
$ ./gtalk -C ~/.galatea/ssm.conf

Then you can type as follows:

set Text = 1
set Speak = NOW

This will speak “ichi” (“one” in Japanese).

Testing SRM

$ cd /usr/local/galatea-engine/SRM/GramJulian/vfr
$ ../../bin/julius -h ../../AcousticModel/hmmdefs,mono16mix,gid.binhmm -v vfr.dict -dfa vfr.dfa -demo -input mic -b 1200

<code> $ cd /usr/local/galatea-engine/SRM $ sudo mkdir temp $ sudo chmod 777 temp $ perl SRM_Main.pl </code> <code> set Run = INIT set Grammar = GramJulian/vfa/vfa.dfa set Run = START </code> The error below is shown. <code> tell cannot connect, engine startup failed. </code> temp/julius.log says: <code> ERROR: m_chkparam: cannot access GramJulian/vfa/vfa.dfa ERROR: m_chkparam: could not pass parameter check </code> to be fixed..

Note on FSM

I have my repository of FSM that fixed some C++ related compatibility problems.

http://github.com/nishimotz/facesynthesizer

http://hg.sourceforge.jp/view/galatea/facesynthesizer/

Dialog Studio and character encoding

Notice: galatea-dialog 20100530-1 or later version uses UTF-8 encoding for AgentManager protocol.

$ galatea-runner 
[runner_dir] /usr/local/galatea-dialog/files
[config candidate] /usr/local/galatea-dialog/files/runner.yml /usr/local/galatea-dialog/files/config/runner.yml /usr/local/galatea-dialog/files/runner.yml /usr/local/galatea-dialog/files/runner.yml
[config] /usr/local/galatea-dialog/files/runner.yml /usr/local/galatea-dialog/files/runner.yml /usr/local/galatea-dialog/files/runner.yml
set broadcast = AM-MCL
set broadcast = DM
set broadcast = FS-MCL
set broadcast = PAR
LOG: START AM-MCL
LOG: START FS-MCL
LOG: START DIM
LOG: START PAR
LOG: START SSM
LOG: START DM
LOG: START FSM
Galatea Dialog Studio 2.2.4b6 (090910)
(c)2003-2009 Takuya NISHIMOTO (nishimoto [atmark] m.ieice.org)
Uses Mozilla Rhino from mozilla.org.
See http://www.mozilla.org/rhino/.
Rhino 1.7 release 2 2010 01 20

Speak “kon ni chi wa” to the microphone. The agent's speech is expected, but it doesn't.

* Unknown command line ... 
#set Text =  
* Unknown command line ... 

Enable : Logger → galatea.io.wrapper.SSMSubModule After speaking “kon ni chi wa” to the microphone, the following event is shown. <code> [29 SSMSubModule main] doOutput() speak (あなたは こんにちはと言いました。) </code>

Solution:

$ sudo chmod 666 /var/lib/locales/supported.d/local
$ sudo echo "ja_JP.EUC-JP EUC-JP" >> /var/lib/locales/supported.d/local
$ sudo locale-gen

Using “locale -a” command, you can check whether the procedure is finished.

Customizing module configurations

You can modify module configurations as follows:

$ galatea-generate myconfig
$ cd myconfig
$ gedit skel/am.conf.txt (or anything)
$ ./script/runner

Note: update (galatea-dialog 100529 or later) is required.

Building deb packages

Version 2010-05-29 of dialog-studio-script (available at sourceforge.jp mercurial repo) is required.

$ ls
dialog-studio-java 
dialog-studio-script
$ cd dialog-studio-java/src
$ ant jar

if the build is successfully finishied:

$ cd ..
$ mkdir ../dialog-studio-script/jar
$ cp bin/gdm.jar ../dialog-studio-script/jar

galatea-dialog-20100530 or later version also uses dialog-studio-script/bin/gtalk (UTF-8 enabled gtalk).

$ cd ..
$ mkdir galatea-dialog-20100529
$ cd galatea-dialog-20100529/
$ sudo checkinstall ruby ../dialog-studio-script/misc/setup_dialog.rb

galatea-dialog_20100529-1_i386.deb

Unofficial releases

release 20100530-1

utf-8_based_system

Since version galatea-dialog_20100530-1, AgentManager uses UTF-8 for character encoding. EUC-JP locale is not necessary to run this version, hopefully.

galatea-dialog_20100530-1_i386.deb

This package includes:

Bug fixes:

  • skelton file of fsm.conf (background of kani-demo was wrong)

Enhancements:

  • Generated app does not use ~/.galatea for tmp directory, but uses (app_dir)/tmp directory. It may help customizing module configuration.

PulseAudio compatibility

  • Generated application can use skel files in the application directory.
  • To improve PulseAudio compatibility, gtalk now uses padsp, and julius uses ALSA.

This is the replacement of /usr/local/galatea-dialog/files

galatea-dialog-files-100528.tar.gz

galatea-dialog 100529 or later deb package includes this fix.

release 20101110-1

This is a snapshot of development version.

galatea-dialog_20101110-1_i386.deb

Mercurial revisions:

Modifications:

  • contains Galatea Dialog Studio 2.3.1 (101018).
  • Modules: FS-MCL and PAR modules is rewritten with Java. DIM modules is obsoleted.
  • julius.conf is updated. GMM based noise rejection is disabled. using galatea-generate, you can customize by skel/julius.conf.txt template.
  • using galatea-generate, skel/gtalk-euc-jp.dic.txt can be used as the gtalk dictionary template.

Notices:

  • do not modify “-outcode WLPSC” and “-module 10500” in skel/julius.conf.txt
galatea_dialog_studio.1289367652.txt.gz · Last modified: 2010/11/10 14:40 by nishimotz
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0